ZTEX Shop

USB-FPGA Module 2.14b (FX3S, XC7A35T, SG 1C, 256 MB RAM)
[ufm-2_14b]

1 - 4 pieces:	284.41EUR
≥ 5 pieces:	On request

Click to enlarge

USB 3.0 interface with Micro-USB connector
Cypress CYUSB3033 EZ-USB FX3S Microcontroller:
- ARM926EJ core at 200 MHz
- 512 KByte SRAM
- 1 Storage Port
- 16 Bit GPIF II at 104 MHz (bandwidth between EZ-USB FX3S and FPGA: 208 MByte/s)
Xilinx Artix 7 FPGA : XC7A35T, Speed Grade 1C
External I/O connector (consisting in two female 2x32 pin headers with 2.54mm grid) provides:
- 100 General Purpose I/O's (GPIO) connected to FPGA
- JTAG signals
- Reset signal
- External power (6 V .. 16 V) input
- 3.3V output
- I/O voltage output or input
- Same pin assignment as USB-FPGA Module 2.13
256 MByte DDR3 SDRAM:
- Up to 400 MHz clock frequency
- 16 Bit bus width
- Up to 1600 MByte/s data rate
- Usable with the Xilinx Memory Interface Generator (MIG)
128 MBit on-board Flash memory
- Allows storage and auto-boot of Firmware
- Allows storage and auto-boot of Bitstream
- Accessible from EZ-USB FX3S and from FPGA
SD card socket
- SD 3.0 (SDXC) support
- SDIO 3.0 support
2 Kbit MAC-EEPROM: contains a unique non erasable MAC-address and is used to store firmware settings
On-Board power supply:
- Two reverse current protected supply inputs: External power (6 V .. 16 V) and USB power
- 5.0 V: 250 mA
- 3.3 V: 3000 mA
- 1.8 V: 1500 mA
- 1.5 V: 1500 mA
- 1.2 V; 1500 mA
- 1.0 V; 4000 mA
- OTG supply switchable and reverse current protected
Optional:
- Battery to store a key for bitstream encryption
Temperature range: 0-70°C (board), 0-85°C (FPGA)
Usable with free Xilinx Vivado Webpack
Powerful Open-Source SDK with many examples

For more information, please visit the products webpage.

This product was added to our catalog on Friday 29 January, 2016.

Customers who bought this product also purchased

2x32 pin male pin header	USB-FPGA Module 2.18b2 (FX3S, XC7A200T, SG 3E, 256 MB RAM)	USB-FPGA Module 2.01c (XC6SLX25, industrial)
14 pin JTAG header	USB-FPGA Module 2.14c (FX3S, XC7A50T, SG 1C, 256 MB RAM)	Series 1 Adapter (w/o female pin headers)